Industrial panel PCs, built for your machine.
Pick the screen, the housing and the extras for your custom HMI panel. We build it in Germany and test it before it ships.
15 to 42 in
Touch screen sizes
IP65
Sealed front
30 sec
Panel swap, no tools
From 1 unit
Up to full series
Trusted by
Start from a proven panel PC.
Then we change it to fit your machine.
Aluminium Panel PC
Our main panel. Made to work right at the machine.
Get a Quote →
Stainless Steel Panel PC
For food, pharma and chemical plants.
Get a Quote →
Front Panel PC
Built into your cabinet door.
Get a Quote →
Fanless Panel PC
Multi-touch, no fan, low power use.
Get a Quote →
Industrial Monitors
Industrial touch screen monitors that match your panels.
Get a Quote →
Industrial Box PC
A compact PC for inside the cabinet.
Get a Quote →
Compare the specs.
The main specs side by side. Every panel can be changed to fit your machine.
| Most chosenAluminium |
Food and pharmaStainless steel |
Cabinet doorIn the door |
With a box PCTouch monitor | |
|---|---|---|---|---|
| Screen size | 15.6″ to 23.8″Up to 42″ on request | 15.6″ to 23.8″Up to 42″ on request | 13.3″ to 23.8″Also fits old 15″ and 19″ cut‑outs | 15.6″ to 23.8″Up to 42″ on request |
| Touch | Multi-touch glass or resistive | Multi-touch glass, hardened and anti-glare | Multi-touch glass or resistive | Multi-touch glass or resistive |
| Protection | IP65Sealed front | IP69For high-pressure washdown | IP65Sealed front | IP65Sealed front |
| Housing | Powder-coated aluminium | Stainless steel 304, or 316L optionFDA-conforming seals | Front frame, built into the door | Aluminium or stainless steel |
| Cooling | Fanless | Fanless | Fanless | Fanless |
| Processor | ARM up to Intel Core i7 | ARM up to Intel Core i7 | ARM up to Intel Core i7 | No PC insideConnects to a box PC |
| Power | 24 V DC or 230 V AC | 24 V DC or 230 V AC | 24 V DC or 230 V AC | 24 V DC or 230 V AC |
| Connections | Ethernet, USB, serialPROFINET, IO-Link, WLAN and RFID on request | Ethernet, USB, serialPROFINET, IO-Link, WLAN and RFID on request | Ethernet, USB, serialPush buttons and RFID on request | Video and USB |
| Mounting | Support arm or VESA | VESA or stainless flange | Cut-out in the door, held by clamps | Support arm, VESA or door |
Specs depend on the size and options you pick. Box PCs and other sizes on request.
Not sure which one fits? Build my HMI panelSwap a panel in 30 seconds.
If a panel breaks, your line does not wait. One person changes it with no tools.
It keeps the settings
The new panel reads them from the arm and starts where the old one stopped.
The ports stay locked
No one can reach the cables without a key.
Mount it your way
Support arm, VESA or the cabinet door.
Built and checked by hand in Germany.
Every panel is built to order in Germany, by a team with over 40 years of experience building panel PCs. Each one is measured, assembled and tested before it ships.
Made to order
Your panel is built for your machine, not pulled off a shelf.
Burn-in tested
Every panel runs a recorded burn-in test, and every check is written down.
Parts for years
Long-term parts, so spares are easy to get later.
1. Built by hand
Each panel is put together for one job.
2. Wired and checked
Every cable and board is checked inside.
3. Tested to take a hit
Panels go through impact tests before they ship.
HMI touch screens made for dust, oil and gloves.
All-glass front. No edges where dirt can sit. Clean it while it runs.
Solid aluminium housing.
E-stop and key switch built in.
Lit function keys. Set each one to the job you want.
Your size. 15 to 42 inch, other sizes on request.
Build your HMI panel. Get a quote.
Pick what your machine needs. Not sure? Skip it and we help you choose.
Extras (pick any)
“I have worked in industrial automation since 2012, in oil and gas and steel plants. I know what a bad HMI costs on the plant floor. So we only build panels I would put on my own machine.”
Shahpour Shapournia, Founder and CEO, RealPars
From your machine to a finished panel.
You talk to an engineer from day one. Not a call center.
Brief
Tell us about your machine and where the panel goes.
Spec
We pick the panel, screen and options with you.
Build
We build it in Germany and test it before it ships.
Questions about custom HMI panels.
