Fanuc Robot Training 4: Fanuc IO & Ethernet/IP Mastery

About this course
Why Enroll in This Course?
A robot does not work alone. It needs signals from the PLC and it sends signals back. On a Fanuc robot this is done with IO, often over Ethernet/IP.
Fanuc Robot Training 4 has 11 lessons. You learn the Fanuc IO types: digital, analog, UOP, SOP, and robot IO. You also learn about groups, interconnects, and the cell interface. Then you configure digital inputs and outputs step by step. In the last part you do the Fanuc Ethernet/IP setup on the PLC side and the robot side, and you test the connection.
This course is part of our robotics courses. With a RealPars membership, you get this course and the other Fanuc Robot Training courses. When you finish, you get a certificate from RealPars.
Ideal for you if...
- You need to connect a Fanuc robot to a PLC.
- You want to understand UOP, SOP, and the other Fanuc IO types.
- You set up or fix robot cells at work.
- You finished the first Fanuc Robot Training courses.
Skills you'll gain
- Explain the Fanuc IO types, including UOP and SOP.
- Use groups, interconnects, and the cell interface.
- Configure digital inputs and outputs on a Fanuc robot.
- Set up Ethernet/IP on the PLC and the robot.
- Test the Ethernet/IP connection between robot and PLC.
Journey to Mastery
Meet your instructor
Top organizations train their team with RealPars
Join the Top 1% of Automation Engineers
What RealPars students are saying…

Live PLC Programming and Troubleshooting Training
Join the waitlist. Be first to know when enrollment opens.

